NanoVNA 50KHz-900MHz Vector Network Analyzer MF HF VHF UHF Antenna +Touch Screen

Description

Description
NanoVNA
50KHz-900MHz Vector Network Analyzer Kit MF HF VHF UHF Antenna Analyzer 2.8" Touch Screen W/O Shell
Description:
Note: Random shipment of new and old versions.
We have redesigned its PCB board. Designed with simple but practical PC control software, you can export Touchstone (snp) files for various radio design and simulation software through PC software. Its improved frequency algorithm can support the measurement frequency of 900MHz with the odd harmonic extension of si5351. Designed with a metal shield to reduce external interference and improve measurement accuracy, si5351 directly outputs frequency of 50K-300MHz with dynamics better than 70dB. Its expanded 300M-600MHz band can provide dynamics better than 50dB, and 600M-900M band with dynamics better than 40dB.
It is a DIY vector network analyzer. It features a 2.8-inch touch screen, 400mAh electricity for off-line application in 2 hours. If you want to prolong the testing time, you can connect it to an extra power bank, or contact us for larger capacity. As for testing via TX/RX, you can get full set of parameters of S11 and S21. What you have to do is to replace the connection cables in the receiving and transmitting ports.
Basic Parameters:
- PCB: 54mm x 85.5mm x 11mm (without the size of connectors, switches)
- Measurement Frequency: 50KHz ~ 300MHz (50KHz -900MHz, enable extended firmware)
- RF Output: -13dbm (maximum -9dbm)
- Frequency Accuracy: ＜0.5ppm
- Measurement Range: 70dB (50kHz-300MHz), 50dB (300M-600MHz), 40dB (600M-900MHz) enable extended firmware)
- Port SWR: < 1.1
- Display: 2.8 inch TFT (320 x240)
- USB Interface: USB Type-C; Communications Mode: CDC (Serial)
- Power Supply: USB 5V 120mA, built-in 400mAh electricity, maximum charging current 0.8A
- Number of Calibration Points: 101 (Fixed)
- Number of Scanning Points: 101 (Fixed)
- Display Tracking: 4, Marking: 4, Save Setting : 5
- Measuring S parameters, voltage standing wave ratio, phase, delay, Smith chart and the like
Package Included:
- 1 x NanoVNA Main Unit
- 1 x USB Type-C Data Cable
- 2 x 30cm SMA Male to Male RG174 RF Cables
- 1 x SMA Calibration Kit Male
- 1 x SMA Female to Female Connector
Note: Please note that the analyzer comes without a shell.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.