OLED Display 25MHz To 6GHz Handheld Smart Singnal Generator RF signal Source

Description

Welcome to my shop
Product Overview
OLED Display 25MHz To 6GHz Handheld Smart Singnal Generator RF signal Source
Detail
Smart Singnal Generator is a broadband, practical, hand-held, simple RF signal source that uses a PC display and integrates a high-performance frequency synthesizer and amplitude control unit (calibrated) to ensure high performance, small size, low power consumption and high
Value for money.
Smart Singnal Generator uses standard USB 2.0 connector (microUSB) for device communication, suitable for indoor, outdoor and even outdoor environments; because the device is light and compact and comes with a display, it is especially suitable for carrying.
The Smart Singnal Generator includes a frequency range of 25MHz-6GHz; a minimum frequency step of 1KHz; an amplitude adjustment function with a maximum output amplitude of +10dBm from 25MHz to 3GHz and a maximum output amplitude of -5dBm from 3GHz to 6GHz (refer to the actual measured value).
).
Host computer software, operating instructions, communication protocol download Baidu cloud link:
https://pan.baidu.com/s/1JP1KOA2bXTod9pPoI4adLg
Operation video download Baidu cloud link:
https://pan.baidu.com/s/1hx_FogxEij5-sTl7cLMhWA
Open in your browser after copying
First, product specifications
1, the net weight of the host: 90g (using CNC aluminum alloy CNC casing);
2, USB power supply current 300mA;
3. Use PL2303SA serial port to transfer to USB chip for communication. When installing the driver, you can choose to install the driver wizard automatically.
4, function:
The left SMA port, the default delivery mode is 10MHz, plus or minus 0.1ppm temperature compensation clock source output, can also be configured as an external clock input mode (need to contact the owner to modify);
The SMA port on the right can be set to the point frequency RF source/sweep source by the button/host computer software, and the amplitude can be numerically controlled.
5, dimensions: length, width and height: 68 * 48 * 17mm (excluding the prominent SMA interface);
6, delivery list: microUSB line one + host one.
Second, the RF signal source port indicators
1. Output signal frequency range: 25M-6000MHz;
2, the output signal power range: -25dBm to +10dBm (in the range of 3G) amplitude flatness of each frequency point, specifically look at the measured curve;
3. Frequency resolution: 1KHZ;
4, frequency stability and accuracy (typical): ± 0.1ppm;
5, harmonic 17dBc (@1GHz);
6, phase noise: phase noise = -104.00dBm / Hz @ 1GHz 100KHz.
Third, the RF signal source port harmonic and phase noise indicators
1. Harmonic analysis, the output signal is 1GHz, the amplitude is 0dBm output, 16.61dBc for the second harmonic at 2GHz, and 17.68dBc for the third harmonic at 3GHz.
2, phase noise analysis, output signal 1GHz, amplitude is 0dBm output,
Phase noise = -95.73dBm / Hz @ 10KHz
Phase noise = -104.00dBm / Hz @ 100KHz
Fourth, RF signal source flatness test
1. The RF signal source is set to 25M-3000MHz, the sweep output is 100K, the sweep time is 10ms, the power is set to +10dBm output; the spectrum analyzer adopts the maximum hold mode.
2. The RF signal source is set to 25M-3000MHz, the sweep output is 100K, the sweep time is 10ms, the power is set to 0dBm output; the spectrum analyzer adopts the maximum hold mode.
3. The RF signal source is set to 25M-6000MHz, the sweep output is 100K, the sweep time is 10ms, the power is set to the maximum output; the spectrum analyzer adopts the maximum hold mode.
4. The RF signal source is set to 25M-6000MHz, the sweep output is 100K, the sweep time is 10ms, the power is set to -10dBm output; the spectrum analyzer is set to the maximum hold mode.
5. The RF signal source is set to 25M-6000MHz, the sweep output is 100K, the sweep time is 10ms, the power is set to -20dBm output; the spectrum analyzer adopts the maximum hold mode.
Package Contents
100% Brand New
1 x
microUSB cable
1X Smart Singnal Generator
Shipping Policy
Item Location
Payment Mathord
Returns Policy
About Feedback
Shipping Policy
Item Location
Payment Mathord
1. PayPal payment accepted only.
2. Items will be shipped to your eBay address. Please make sure it is correct.
3. Payment must be received 4 days after auction ended.
Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.
About Feedback
When you satisfied with our product and services please leave us positive feedback.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.