PS100 AS N1201SA 137M-2.7G UV RF Vector Impedance ANT SWR Antenna Analyzer Meter

Description

PS100 137.5MHz-2.7GHz UV RF Antenna Analyzer SWR Meter Tester Same as N1201SA
Features:
Built-in high-capacity lithium-ion battery for mobile and outdoor use.
Shutdown automatically saves the setting parameters without manual intervention. After the next power-on, the interface settings are exactly the same as before the shutdown, and the use is very worry-free.
Can be used to test the antenna, the impedance of the radio frequency devices.
The instrument has four interfaces: single point measurement, scan function, system information and calibration. The default power-on interface is single point measurement.
- Model No.:PS100， function
Same as N1201SA
- Working Frequency: 137.5MHz~2.7GHz
- Stepped Frequency: 1kHz
- Display: 2.4inch TFT with resolution 320*240(QVGA)
- Power Consumption <1.5W
- Charging Current: 400mA
- Charging Port: USB
- Auto Power Off: Settable 5-60minutes
- Measured Parameters: Impedance, reactance, SWR and S11
- Resolution: 4-digit readings
- Frequency Accuracy: <±10ppm
- Connector: SMA-K
- Impedance Measurement Range:
1Ω~1000Ω @frequency < 1300MHz;
1Ω~300Ω @frequency >1300MHz (Impedance Absolute Value)
- Standing Wave Measurement Range:
1~65 @frequency < 1300MHz;
1~10 @frequency >1300MHz
- S11(dB)Measurement Range: 0dB to -50dB
- Error (Single-point measurement): For Impedance: < Impedance absolute value x 5%±0.1Ω (Z<200Ω, <1.5GHz) For Standing Wave: < Effective readings x 10%±0.1 For S11: 0.1dB/5° (0dB to -10dB) For (dB/°): 1dB/10° (-10dB to -20dB); 5dB/20° (-20dB to -40dB)
- Directivity: < 35dB (140MHz to 2GHz after calibration); < 30dB (2GHz to 2.7GHz) - Scanning Points: 280 - Output Level: -18dBm - Working Temperature: 0℃ to 40℃ - Atmospheric Pressure: 860hPa~1060hPa Description:
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration - The default boot into single-point measurement interface. - Aluminum alloy shell prolongs its service life.
Note:
For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup & Shutdown:
- Hold down the CTRL key off press the power switch button. - The boot state, long press (2S above) the switch button, after the release, the instrument will shut down - The boot state, long press (2S above) the switch button, after the release, the instrument will shut down Advice when Using:
- In order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes. - Try to use good quality RF cable and connectors. - Calibrated cable marked to the next may not need to calibrate and direct use. - Test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable. - Measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements. - If the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis. Package Included:
- 1 x PS100 Antenna Analyzer SWR Meter with usb cable
Shipping
Item will be shipped out within 2 business days after receipt of your payment, we ship the item through hongkong Air mail or China Post.          We Ship to Worldwide, but Italy, Nigeria, Brazil will take long delivery time .
Before buying, Please make sure your address is correct. Or not, please correct it before payment
Ship to worldwide from Hong Kong within 12-24 hours after payment completed received, and will give you the tracking number asap. sometimes we will send it by flat post air mail if just one low price order.Hope you understand.
we advise shipping by DHL or EMS,and we have gave a discount for you,you can received it in 4-9 business days.
it takes about 15-30days usually if shipping by CHina/Hong Kong post air mail
Payment
We ONLY accept payment by Paypal.
All payments must be received within 7 working days after auction has ended. Non-paying bidders will be reported to ebay.
Feedback
If you have any questions or comments about our products or policies, please contact us by emails with your purchased item number.
You also can contact us by leaving us an eBay message,we will be responded within 24hours.
Customer satisfactory is most important to us. If you have a problem or question regarding your transaction please contact us before leaving any type of feedback.
Negative feedback does not solve anything. We are always willing to work things out, thank you!
Return Policy
Refunds are only offered for defective products reported within 7 days upon receipt
Buyers need to return the defective item for the replacement at his own cost. Item must be returned by registered airmail to our requested address.
We do our best to serve each and every customer the best we can.
if you need more items,we can provide you a wholesales price,you can contact us by message or email.